How to Handle a Double-Edged OTF Knife Safely: Grip, Cuts, Closing, and Care

Two people opening a cardboard delivery box together on a sofa

How to Handle a Double-Edged OTF Knife Safely: Grip, Cuts, Closing, and Care

Quick answer: On a double-edged OTF, both edges are sharp, so there's no spine to put your thumb on and no safe side to wipe along. Keep your fingers on the handle and your thumb on the switch. Fire and retract only with the front pointed at nothing. Cut away from your body with the tip and the first inch of the edge. Wipe one flat side at a time from the handle out to the tip, never pinching across both edges. Retract the blade before you set it down, hand it over, clip it, or use the glass breaker.

Most people learn knife habits on a folder or a kitchen knife. Those knives have a dull back. You rest your thumb on it, push on it, and wipe a towel down it without thinking. On a double-edged dagger OTF, every one of those habits ends with a cut thumb.

None of this is complicated. It's about six habits, and you can build them in an evening. If one of these is going under a tree this year, walk the new owner through this page before they carry it.

Two people opening a cardboard delivery box together on a sofa
New knife, new habits. Learn them at the table before you need them on a box. Photo: Gustavo Fring / Pexels.

1. Safety first, and know your local knife laws

Practice at a table, sitting down, with nothing in front of the blade and no kids or pets nearby. Treat the knife as live every time you pick it up, even if you're sure it's retracted. Look at the front of the handle before you touch the switch.

Know your local knife laws before you carry. OTF and automatic knife rules vary by state and city, and some places treat daggers and double-edged blades differently from single-edge knives. Start with our OTF knife laws guide, then check your local rules. This is not legal advice.

2. Know which edge is which

A double-edge spear-point dagger has a centered point and two edges. On a dagger like the SideKick, one edge is plain and the other is serrated.

  • Plain side: clean push cuts. Paper, tape, cardboard, string, and anything you want a neat line on.
  • Serrated side: saw-through jobs. Cord, rope, zip ties, plastic strapping, and clamshell packaging.

Before you fire, look at the handle and know which way the serrated side will come out. Then you can turn the knife in your hand for the job without fumbling with the blade out. Our plain vs. serrated guide goes deeper on what each edge is good at.

3. Grip: fingers on the handle, thumb on the switch

  • Wrap your fingers around the handle behind the front opening. Nothing goes in front of the handle, ever.
  • Your thumb goes on the switch to fire or retract, then back onto the handle.
  • No thumb on the blade. A single-edge knife lets you choke up and push with your thumb on the spine. A dagger has no spine, so that push lands on an edge.
  • Keep your grip short of the front of the handle, where the blade comes out. That's the spot that catches people.

4. Firing and retracting

On a double-action OTF, the same switch fires the blade and brings it back.

  1. Point the front of the handle at the floor or at the work, never at your other hand or your leg.
  2. Push the switch forward with your thumb. The blade should lock out with no wiggle.
  3. When the cut's done, point it down and away again and pull the switch back.
  4. Watch the blade go all the way in. Don't catch it, guide it, or press it against your palm or leg to help it home.
  5. If it only half-fires or won't lock either way, stop. Don't hit it on your palm or poke at it. Our guide on how to fix an OTF knife covers what you can safely check, and the double-action mechanism guide explains why it happens.

5. Cutting: the back stroke is sharp too

This one surprises people. With a single edge, pulling the knife back toward you is harmless. With a dagger, the "back" of the stroke is the other edge.

  • Cut away from your body, with the work on a table, a tailgate, or a bench. Don't cut in your lap.
  • Use the tip and the first inch. On boxes and tape, only run the point as deep as the tape. A 2.75-inch blade is more than enough for anything in the mail.
  • Keep your other hand behind the blade, not beside it. The edge on the far side is pointed at whatever is out there.
  • Zip ties and tags: slide the serrated side under the tie with the edge facing away from skin, clothing, and cables, then lift and saw. Don't cut a tie off someone's wrist or a bundled cable with a dagger. Use snips.
  • No prying. The point is centered and thin. It isn't a screwdriver, a can opener, or a chisel, and a snapped tip goes wherever it wants.
Steel ruler and orange bar clamp on a wooden workbench covered in wood shavings
Cut on a stable surface, away from you, with your free hand behind the blade. Photo: Tima Miroshnichenko / Pexels.

6. Wiping and cleaning without cutting your fingers

The towel habit is the one that gets people. Pinching a rag around a blade and pulling it off works on a single edge. On a dagger, it puts both edges in your fingers.

  1. Deploy the blade and lay the knife flat on a towel.
  2. Wipe one flat side from the handle out to the tip, with the cloth flat under your fingers.
  3. Flip the knife and do the other side the same way.
  4. Use a cotton swab for the serrations and the base of the blade, working outward.
  5. Retract the blade and blow out the front of the handle with canned air.

Got it wet or muddy? Our rain and mud clean-up guide has the full routine. For the monthly clean and lube, see the OTF maintenance guide.

7. Handing it over, clipping it, and putting it away

  • Retract the blade before it leaves your hand, every time. Don't pass a dagger blade-out, handle first or not.
  • Retract before you clip it. Don't clip it into a pocket with the blade out, and don't feel around a pocket for a knife that might be open.
  • Set it on the reversible clip for the hand you carry with. Our left-handed setup guide walks through moving the clip.
  • Store it retracted and out of reach. That means a drawer or a case, not loose in a console or a junk bowl. More in responsible OTF storage.

8. The glass breaker: blade in, point out

The SideKick has a glass-breaker point on the butt of the handle. It's for getting out of a vehicle in an emergency, not for everyday hammering.

  • Retract the blade first. A dagger blade that's out while you swing the other end is a bad combination.
  • Hit near a corner of a side window, not the middle, and keep your face turned away.
  • Windshields are laminated and won't break like side windows.

How it works and where to aim is covered in how does a glass breaker work.

The six-habit checklist

  • Look at the front of the handle before touching the switch?
  • Fingers on the handle, thumb on the switch, nothing on the blade?
  • Fire and retract pointed at nothing, and watch the blade seat?
  • Cut away from you with the tip, free hand behind the blade?
  • Wipe one flat side at a time, handle to tip, no pinching?
  • Blade retracted before you hand it over, clip it, store it, or use the glass breaker?

FAQ

How do you safely hold a double-edged OTF knife?

Wrap your fingers around the handle behind the front opening, and keep your thumb on the switch only to fire or retract. Don't rest your thumb on the blade the way you would on a folder's spine. A double-edged dagger has no dull back, so that thumb lands on an edge.

How do you close a double-action OTF knife?

Point the front of the handle down and away from you, then pull the switch back with your thumb. Watch the blade retract and seat fully. Don't catch it or press it against your hand or leg to help it in. If it stops partway, stop using it and check it before you carry it again.

What is the serrated side of a dagger OTF for?

The serrated side handles saw-through jobs like cord, rope, zip ties, plastic strapping, and packaging. The plain side is better for clean push cuts on paper, tape, and cardboard. Know which way each edge faces before you fire the blade.

How do you clean a double-edged knife without cutting yourself?

Lay the knife flat on a towel with the blade out and wipe one flat side from the handle to the tip, keeping the cloth flat under your fingers. Flip it and repeat. Use a cotton swab for the serrations. Never pinch a cloth around the blade and pull, because that puts both edges in your fingers.

Are double-edged OTF knives legal?

It depends on where you live and carry. OTF and automatic knife rules vary by state and city, and some places treat daggers or double-edged blades differently from single-edge knives. Check our OTF knife laws guide and your local rules before you carry. This is not legal advice.

A full-size dagger OTF for everyday jobs

The SideKick OTF | Serrated Dagger is a double-action OTF with a 2.75-inch double-edge spear-point blade in black 3Cr13 steel. One edge is plain and the other is serrated, so you can do the clean cuts and the saw-through jobs with one knife. It's 7 inches overall, with a 4.25-inch zinc-alloy handle, a 3 mm blade, a reversible clip, and a glass breaker on the butt. It's covered by our Limited Lifetime Warranty. $50. Same habits as above: fingers on the handle, cut away from you, and retract before it leaves your hand.

Stay sharp out there.
Tactical Chris

0 comments

Leave a comment